Flat mount for the Starlink V3 (Rev 4) flat mount. 

I have put 4 magnetic bases with m6 threads into the legs to mount to a vehicle. 

Printed on a Ender-3 V3 KE in PETG. Print size is 213 x 213

• Layer Height: .2mm
• Line width: .4mm
• Walls: 3
• Infill: 20% Cubic
• Supports: Yes. Rectilinear may collapse under the locking tabs so i used Rectilinear grid.
• Brim: Yes
• Print Speed: Max 25mm/s (Print time 23 hours)