GPU Kit Card

Inland Filament Used:

Printer Settings:

1 Hr 11 Min
220°C Nozzle Temp
60°C Bed Temp
No Supports
Infill: 15% Gyroid
Speed: 100mm/s wall, 180mm/s infill, 300mm/s travel
Assembly Instructions:

Using a flush cutter remove the GPU parts from the sprue
Place the first fan with the chamfered part pointing out
Insert the axle with moderate force (depending on your printer's tolerances/ material)
Press fit the grated vent into its corresponding cavity (may need a drop of glue if too loose)
On the back side place the second fan just as the first one was done
For the bracket, inset the clip into it and then press both into the two holes on the flat square end of the model. This may take force for a solid fitment and depending on the flexibility of your printed material.

STL designed by _cosmic_forge

GPU Kit Card

by Micro Center · original on Printables ↗

Gadgets / Computers

♥ 191⬇ 554🖨 6 prints

License: Creative Commons — Attribution — Noncommercial ↗gpukitcardmicrocenterkitcardsinlandfilamentgpukitcard

Print profiles

GPU Kitcard - Microcenter.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GPU Kitcard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bracket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
clip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
axle x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
grate vent.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fan x2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print