This is a print in place articulated Minecraft themed Axolotl! 

Designed with printability and accessibility in mind, to print this model you need:

Zero Supports 

No Multicolor 

And It Fits On Any Build Plate Size

This model prints in one piece on the build plate, requires zero supports, and comes off the bed ready to go! 

Whether you are printing as a gift, or just for yourself, this axolotl will be perfect for anything you can think of! Bring awareness to this critically endangered species with this cute model, that is also quite fun to fidget with!

I have provided two models. One of them has a small hole in the tail to allow you to pass a string through it to hang it up or attach it to a keychain. The other model has no hole in the tail. 

Print Settings

.2mm Layer Height

15% Infill

2 Perimeters

Important: 

I only printed this model at scale. While it will certainly work when scaled up, if you scale down you may have to print smaller layer heights or use a smaller nozzle to print the joints well.