Print in place fishing rod. Use the smallest nozzle you have and the biggest printer you have. If your printer can not handle the 100% rod/handle, then shrink the rod down to 75% and the handle labeled 75%. If you are using the 100% rod/handle, you must buy a handle for the rod that has an inner diameter of 12 mm, for example, this one. If you are using the smaller one, you need to find one that has an inner diameter of 10 mm, for example, this one. Note: This does not include a reel you will need to buy one.
Collapsible Fishing Rod
by Kieran D'Arcy · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 218⬇ 659🖨 0 prints
Print profiles
Handle 100%.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Handle 75%.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Updated Rod.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print