Description
Overview.
A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.
WARNINGS
Led strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn't test it) PLA in this case can bend over time especially if you use heavy panel like budha.
So in summary I tested and recommend :
Main Ring - ASA
Base, Diffuser - PLA
Panels- ASA ( PLA is possible but can bend )
If you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.
Electric parts you need.
The easiest way is to buy electrical parts designed specifically for The Ring Lamp. Provides easy installation without the need for soldering.
It is available on AmazonÂ
(Dimmer version) https://amzn.to/4e8mgSj
(On-Off switch version) https://amzn.to/3ZNb0q4
You can also search for each part separately. You will need
- led stripe - best are LED COB 8mm
- charger for LED strip
- dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm
- OFF-ON switch or dimmer
Printed Parts
Main Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.
Diffuser should be printed with 0.2 mm layer height.
1.After print, glue led strip to inner side of Main Ring
Start from hole on bottom side
2. Put Main Ring into base. It should fit tight without glue.
3. Insert the electric part into the base and connect them by soldering
4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.
5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables
If you any question or suggestion write to me
Have fun
Ring Lamp
by Sevro · original on Printables ↗
Hobby & Makers / Other Ideas
♥ 1.8k⬇ 4.8k🖨 33 prints
Print profiles
Panel Clean.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PanelBudha.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PanelLOTR1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PanelBonsai.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PanelBlossom.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main-ring.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
diffusor.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Birds.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Deer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PanelLOTR2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print