Intro

A nice twisted fidget toy…  This one was designed not to pass through but to be able to stick together.

Why you'll love it?

• Easy print…

• Sooo nice gadgety :-) 

Recommended print settings

• Nozzle: 0.4

• Layers: 0.2

• Infill: 0% (yes, 0%)

• Perimeters: 2

• Material: I recommend to use PLA or PETG (see below)

Important: Print both parts separated, not stacked together.

When printed, it needs a little time to run smooth - that is normal.

Filament recommendation

I printed this model using Prusa Prusament and got great results. See below for my recommendations.

Prusament PLA Blend Royal Blue

Prusament PLA Blend Lime Green

Copyright

You are welcome to print this model for personal use. Please respect the copyright. Unauthorized reuploads are monitored and reported.

Feedback & Support

If you enjoy this model, please consider hitting the LIKE button – it truly supports my work.

Have ideas, FEEDBACK or suggestions for improvements? I’d love to hear them – feel free to leave a comment.

Printed it already? That’s the best compliment! Please share a photo in the MAKES section – seeing your prints is incredibly motivating and helps others get inspired too.

Thank you for supporting independent designers and makers. ❤

Follow me for more like this...

FOLLOW ME for more practical prints, upgrades, and tools – new models coming soon.
Check out my profile for all uploads.

You may also like these models

This model is part of my huge collecion. Do not miss to check out what else could be useful to you.