Here's my newest version of the dolphin phaser, complete with internal reveal and belt holster. This new version has smoother contours, better handle and grip, and sleeker overall shape.
Model Notes
Uses 6x2mm magnets to hold the forward section together.
For internal parts assembly:
Glue the Pegs and Rods to the Middle section, and the flat ends of the Cores to the Body.
Place the Cutout over the cores then glue the Cap to the Core ends with the holes. Then carefully glue the Cutout into the rectangular slot on the Middle.
Important: when using supports with the Body and Middle, it is important to block them from happening inside the tiny holes because they are extremely difficult to remove and can jam inside.
If you don't want the internal parts shown just print the Pegs to connect it.
Display stand for Nemesis and Voyager included.
Parts to modify it for ‘Endgame’ version are also included.
For the Endgame version, print the trigger in red, the power buttons in white, and the emitter in black, and print the extra Endgame Frame and LED.
Update Log
January 2 2026 - Added another version of the LED power bar without the separation gap so its only 8 bars instead of 16.
July 15 2024 - Added a static version of the body and middle that uses a single connector for an easier build option.
July 2 2024 - Added Endgame version of the tag and additional parts to complete the Endgame phaser. There is a black ‘frame’ that goes over the power display area, and a little green triangle LED that goes into the top groove on the emitter.
June 26 2024 - Everything printed and fit great, except for the following which was fixed: Cores were too long and Cutout was too thick which kept it from closing flush; Plate was a little too tight to fit so should be better now; the Pegs and Rods were too tight so I reduced their thickness and they slide in easier.
Filaments Used
PLA: Prusament Galaxy Silver, Overture Matte Black, Ziro Silk Silver, CC3D Silk Antique Gold, some generic samples for clear and green.
Buy prints of this model:
Ancient Stone Inspirations - https://ancientstoneinspirations.com/product/star-trek-nemesis-dolphin-phaser-type-ii-with-display-stand-and-holster-3d-printed-prop-replica-cosplay-fan-art/
Fleetprinter - https://www.ebay.com/usr/fleetprinter
Intrepid 3D Prints - https://www.etsy.com/listing/4360651832/star-trek-nemesis-dolphin-phaser
QUIGLEYPRINTED - https://www.etsy.com/shop/quigleyprinted/?etsrc=sdt&dd_referrer=https%3A%2F%2Fwww.printables.com%2F
Trekkie Time ebay - https://www.ebay.co.uk/str/trekkietime?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=L8JhI2TlS9e&sssrc=3418065&ssuid=L8JhI2TlS9e&stype=1&widget_ver=artemis&media=COPY
Trekkie Time Etsy - https://www.etsy.com/shop/trekkietime/?etsrc=sdt
Star Trek: Nemesis Dolphin Phaser V2
by 𝗨𝗻𝗶𝗺𝗮𝘁𝗿𝗶𝘅𝗥𝗲𝗱🪐🌠 · original on Printables ↗
Costumes & Accessories / Props
♥ 107⬇ 631🖨 12 prints
Print profiles
Dolphin phaser V2-Holster Clips.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Buttons-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Display 16 bars-green to black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Holster End.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Emitter-silk silver.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Stand Leg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Holster Pouch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Grip 2-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Stand_Base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Knobs-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Trigger-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Holster Bend.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Body-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Middle-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Stand_Tag Nemesis.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Grip 1-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Middle no knobs.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Display raised-black to green.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin_phaser_V2-Rods-gold.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin_phaser_V2-Pegs-gold.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Cutout.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2 Plate-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Cores-clear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-stand_tag Endgame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Endgame LED-green.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Endgame Frame-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser-V2-Static connector.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Middle static.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Middle no knobs static.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Body static.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dolphin phaser V2-Display 8 bars-green to black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print