This is a simple trashbag holder optimised for vase mode.
The big one has an inner diameter of 80mm and a inner height of 180mm.
The small one is 50mm by 130mm.
You can tape it or drill small holes for screws.
Both had a wall of 2mm and the bottom is 1,2mm.
I printed both with a 0,6mm nozzle @1mm wide and 0,4mm height (3 bottom layers)
The big one only took 1h17min with my volcano hotend.
Trashbag holder (vase mode)
by Jo · original on Printables ↗
Household / Kitchen
♥ 5.2k⬇ 11.2k🖨 81 prints
Print profiles
Trashbag_holder_small.stlIN STOCKDEFAULT
⏱ 1h 19m · 47 g · 54 × 51 × 131 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Trashbag_holder_big.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print