These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.

Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) if you see the case for sale anywhere please reachout.

Another case for Heltec v3 board designed with the Meshtastic project (https://meshtastic.org) in mind that accepts 3000mah battery by maker focus.
Has a cutout for the sma antenna connector so the antenna doesn't move when you screw or unscrew the antenna.

Keep in mind the back side of the heltec board should go in first and the usb-c side. You will need to push the usb-c side of the case for the board to fit. If you want to remove the board from the case you will need to push the usb c side of the case and then apply gentle pressure to the screen.

Required hardware:
1 LiPo battery Amazon Link
1 Heltec v3 Amazon Link

Meshtastic® is a registered trademark of Meshtastic LLC.
Amazon links are for reference. I donot earn anything from the above links.

Heltec V3 case with meshtastic Logo

by Tejasav Thind · original on Printables ↗

Hobby & Makers / Electronics

♥ 81⬇ 1.0k🖨 4 prints

License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗loralorawanmeshtasticheltecmakerfocusheltecv3heltecv3case

Print profiles

heltec_v3_front.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
heltec_v3_Back.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
heltec v3 button v2 (print it twice).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
heltec v3 button v2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print