I am going to preface this by saying that I am not putting together a full build guide, this is literally just all the parts I altered, this was literally a personal project that I decided to share because of the feedback I received. You have been warned.

What is the SLARP?

The SLARP is a SLAB, but longer, with an internal magazine, converted to be stripper clip fed, and with the aesthetics of a Russian Contract Winchester M1895. It is over a meter long. It requires a 45cm barrel to work.

And… what is this listing?

This is literally a file dump. The parts necessary to print this variation are here, but you will need to also get the other files for the SLAB (here on Printables, or at Sillybutts' Github). You will also need to have a 3D printer capable of at printing 250mm tall, as these parts are very large and only really fit on Bambu and larger printers. The top is mostly held together by the 3/16" steel rods; so is the front end. Stock swivels are Magpul style QD swivels that snap into the plastic. I highly recommend you watch the video above for more details.

So… What do I need to make this?

In addition to the normal SLAB parts, you will need:

1x 45cm barrel
1x 10-32 x 5/16" Pan Screw (Same as the large screws on the rest of the SLAB)
1x 190mm long 10-24 threaded rod
2x 10-24 nuts
2x 175mm long 3/16" steel rods
2x 200mm long 3/16" steel rods
1x 65mm long 1/8" steel rod
2x 100mm long 1/8" steel rods
2x QD sling swivels
9x F683ZZ bearings (for the BCAR)
9x M3x10mm button head screws (for the BCAR)
2x M2x6mm screws (for the rear sight)
1x Nerf drum mag spring (like used in thahnlon mags)
3x 6x3mm magnets (for the dust cover)
1x pen spring (for the plunger catch mechanism)

SUGGESTIONS, QUESTIONS, OR ISSUES? CONTACT ME!

I can be found on Reddit and Discord, but I am most active on Discord. I can be found on the /r/Nerf Discord server, but if you need, you can DM me. If you do make this blaster, I'd love to know!

My Discord username is: @brooklyn_tony198

My Reddit username is: u/BrooklynTony198

Please note that I will generally not be accepting friend requests for DMs; to DM me on Discord, please join the /r/Nerf Discord server first and DM me through there.

IF YOU WANT TO SELL HARDWARE KITS OR PRINTED COMPONENTS OF THIS BLASTER, PLEASE CONTACT ME FIRST.

NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.

SLARP Lever Action Foam Dart Blaster

by Brooklyn Tony · original on Printables ↗

Toys & Games / Outdoor Toys

♥ 2.1k⬇ 3.1k🖨 9 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗blasternerflarpnerfblasterslableveractiondartblasterhalfdartsillybutts

Print profiles

Front Handguard.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MuzzleB.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SideCover_L Blank.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dust Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
STRIPPER CLIP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Magazine.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MuzzleA.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front Cap Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front Top Receiver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SCAR Muzzle A.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SideCover_R_Blank.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rear Sight Leaf.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front Cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Connector Bar.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SidePanel_R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MXL Spigot SCAR v22.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
StockPanelB_L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Extended Stock.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
FeedGuide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
StockPanelA_R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SidePanel_L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rear Upper Handguard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Sight Block.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rear Top Receiver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rear Sight.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Handguard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Left Feed Lip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
StockCoreA.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Right Feed Lip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Middle Band.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mag Floor Plate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SLAB 4 v207 parts - StockCoreC (2).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mag Follower.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print