This model is for the airsoft version of the SIG Sauer P320 M17 from VFC. It's not for a real gun.

Part you need to print:

• Body
  • 1x Right side
  • 1x Left side
  • 1x Trigger
  • 1x Endcap front (v1 or v2 )
  • 1x Endcap back ( v1 or v2)
  • 1x Mag release pin (0.25mm nozzle recomend)
  • 1x Mag release bolt (0.25mm nozzle recomend)
  • 1x Pin 5mm
  • 5x Pin 6mm
  • 4x Pin 8mm
• Stock
  • 1x Stock base
  • 1x Stock release pin (0.25mm nozzle recomend)
  • 1x Stock release (0.25mm nozzle recomend)
  • 1x Stock rail right ( use high infill / permiter count)
  • 1x Stock rail left ( use high infill / permiter count)
  • 1x Stock butt v2
• optional
  • 2x rails 
  • 1x Reddot riser

The Dummies they are not needed.

Additional Parts needed:

• cylinder head screws
  • 4x M4x22 (Endcaps)
  • 5x M4x14 (or 16)( Body)
  • 2x M4x12 (Stock base)
  • 2x M4x10 ( Stock butt)
  • 2x M4x8 (Stock base)
  • 3x M3x12 (Body, Reddot)
  • 6x M3x8 (Rails, Reddot riser)
• Hex nuts
  • 15x M4
  • 9x M3
• Compression springs
  • 1x 4mm x 50mm d=0.4mm (Trigger)
  • 1x 4mm x 12mm d=0.4mm  (Stock release)
  • 2x 3mm x 15mm d=0.4mm (Mag release)
• Orginal parts
  • Mag release

Notes

• Use grease on the trigger. It should move easily.
• Use the original mag release on the rear mag
• You don't need tools to convert from Pistol to conversion Kit
• When you insert the reciver you need to pull the Trigger from the conversion kit forward and pull the trigger of the reciver. It can be tricky.
• The difference between Endcap v1 and v2 is the v2 has loops for a sling
• I use the Acetech Tracer Unit "Brighter C" with my replica.
• I printed the parts on a Prusa MK3s (Printbed size 200x210mm).
• The printed mag releas is fragil and can break easily.
• approx weight 1200g + 270g (2.mag)
• The fusion 360 file is attached. Feel free to modify it.