This is a modification of this crossbow.
Print parts from the original crossbow and combine them with these files.
The 3030 profile has to be shortened to 31.5cm (32cm should work too).
The needed components from the original model are:
- Case
- Cocking rope
- Footpeg
- Bolts (for this version, bolts have to be 33cm long)
- Buttstock (not needed)
Assemble them using the assembly guide in the original crossbow.
For this remix, there are some additional needed parts:
- 4 skateboard bearings
- M5 3030 profile T-nuts
- M3x25 2pcs - for back pulleys
- M3x12 3pcs - front end of the rubber shroud
- M3x8 2pcs - back end of the rubber shroud
- M5x16 3pcs - back pulley mount and rubber shroud mount
- M5x12 2pcs - rubber mount
- M5x10 4pcs - limb mount
- M3x35 2pcs - secondary pulley
- M5x45 2pcs - primary pulley
- Speargun rubber 14mm OD, two pieces of about 10cm (you need to tune the length)
The secondary pulley and back pulleys are assembled by inserting skateboard bearing into printed pulleys.
Hybrid Crossbow
by Yeet · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 200⬇ 575🖨 0 prints
Print profiles
rubber shroud.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rubber shroud back mount.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main pulley bushing.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
secondary pulley.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
limb mount.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back bearing pulleys mount.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back pulley.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back pulley cap.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4x rubber mount.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
limbLeft.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
limbRight.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main pulley left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main pulley right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print