Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted.

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 Plus

Rafts:

Supports:

Resolution:

0.2

Infill:

Filament: Sunlu PLA +

Black

Notes:

Best with 0.8 nozzle

Post-Printing =============

I designed it taking into account the tolerance needed to make the two parts fit without too much post-printing work. rnPlease make sure you clean thoroughly the threads before trying to screw the two parts together. Some repeated screw-unscrew movements will be needed before arriving to the lowest-extension-configuration. rnLubricant can speed-up the process of screwing the parts together for the first time.

Category: Replacement Parts

Heavy duty adjustable furniture leg

by MarcoPi · original on Printables ↗

Household / Other House Equipment

♥ 3.1k⬇ 4.6k🖨 15 prints

License: Creative Commons — Attribution — Noncommercial ↗kitchenshelflegfurniturereplacementwardrobeadjustablescrewclosetgaragethingiverseheavyduty

Print profiles

LowerPart.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
UpperPart.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print