Dragon

Following on from our Mother's Day dragon it seemed only fitting that we made a version of the dragon on their own.

Print profiles: 150 mm dragon and 100 mm dragon length 3MF profiles (for Bambu)

Material: Bambu PLA Basic Red (used with 150 mm profile) and Siddament Dualcolour PLA Red Gold/Copper (used with 150 mm and 100 mm profiles)

Print recommendations: Designed as a single colour profile. Full colour profile coming soon! Recommend setting seam position to back as per 3MF file. Enable Outer and Inner Brim.

Supports: Yes. Supports required - Enable tree (auto) supports and set to “on build plate only” in the Bambu slicer.

Use tweezers to remove supports - take caution removing supports around tiny toes.

Print details:

Bambu Lab X1 Carbon 0.4 nozzle

Textured plate

0.12mm High Quality layer height

2 walls

15% infill

How can you support our work?

If you like the model please follow and like. If you like our work, and want to support it, buy us a coffee at:

https://www.buymeacoffee.com/jinivus