This mine is a continuation of the PMN mine series.
It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a replacement for the PMN-2.
The mine is currently in use in the Russian-Ukrainian conflict.
The mine is a working dummy. The foot cross moves in the same range as the real mine. You will need a spring (length approx. 40 - 50 mm, outer width 22 - 27 mm, wire thickness up to 2 mm)
To complete the real look, you can insert a cotter pin (max. cotter pin diameter 2 mm) and a piece of cloth through it.
Mine is almost impossible to find on the internet. The appearance of this mine is taken from only a few pictures and the rest is my creativity. Do not take the appearance of the mine as final.
Organic supports; 0,4mm nozzle; layer height 0,2; Prusa MKIV; Filament NEBULA 1,75mm Army Green
For personal use only
PMN - 3 (Antipersonnel Landmine)
by Mumiell · original on Printables ↗
Costumes & Accessories / Props
♥ 68⬇ 1.3k🖨 1 prints
Print profiles
PMN-3 bolt.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PMN-3_Pressure cross.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PMN-3_bottom.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PMN-3 ring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PMN-3 cover.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print