This is a replacement battery cover for the PSP 1000.

Things you need to be aware of:

• This is suitable for only the PSP 1000. It is not designed for any of the later models.
• The thin tabs on the bottom of the cover are fragile, if you experience any problems you can reinforce them with molten filament and sand the excess off. You can also modify them to be thicker.

Print Settings

• Brim enabled
• 0.05mm layer thickness (0.1mm might do if you want it quick)
• Print upside down if you want it to be easy but ugly. Or, print right side up to have a headache removing supports but it looks way nicer.
• Fuzzy skin enabled (make it minimal)
• eSUN white PETG filament
• 0.4mm brass nozzle

Credits to Wesk at Bitbuilt for 3D scanning the reference object, his work won't go unappreciated: https://bitbuilt.net/forums/index.php?threads/sony-psp-1000-console-scan.5639/

Have fun printing and I can't wait to see your results!