Tips for printing:
Supports: Yes (tree)
Layer height: 0.16mm (optimal)
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: Arachne
Brim: Yes
Colors and filament I used (4 Color Version):
PLA / White - for the horns
PLA / Black - for the feet
PLA / Dark Brown - for the body
PLA / Pink - for the snout
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
Use Supports for the snout as shown in the picture below!
Cute Highland Cow
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 215⬇ 1.4k🖨 7 prints
Print profiles
CuteHighlandCow.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CuteHighlandCow_Multicolor4ColorVersionBambuStudioX1C.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CuteHighlandCow_Multicolor4ColorVersionPrusaSlicerXL.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print