Currently very frequently used anti-personnel mine in Ukraine.
It consists of five parts. I printed from PLA and PETG.
The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical bending.
The parts fit together nicely. For a more realistic look to the mine, use beige filament for the bottom and middle parts and black for the cap and ring.
The inner part is actually a pressure plate. It doesn't work on the principle of spring compression as with other mines, but like the PMN-2 mine, it works by having to deflect either edge sheet off axis.
I use organic supports. You will need a 3mm diameter cotter pin.
For personal use only.
PMN - 4 (Antipersonnel Landmine)
by Mumiell · original on Printables ↗
Costumes & Accessories / Props
♥ 46⬇ 940🖨 0 prints
Print profiles
Cap_PMN4.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
middle part.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
safety_ring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pressure_plate_PMN4.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
PMN-4_bottom.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print