🖨️ Print Shop
Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. 

Assembly

Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way. Turn the knob counterclockwise to separate the jaws and install the guide pins through both jaws and screw them into the frame with the threads. You may need pliers for that. Then slip the other frame side on, and they should hold with friction. Next, install the top connector (m3x5) screws). Attach the small knob to the main screw (clockwise side) and then the roller (m3x10) screws. 

The angle guide STEP file is ready for multicolor, but I included an STL for single-color printing.

NOTE: 
It's best to print the roller with random seams. This will prevent a pronounced bump when you roll it across your sharpening surface.
 

Required Hardware:

  • 3x M3x5 head cap screw
  • 2x M3x10 (or longer) head cap screw 

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

by JohnMartin · original on Printables ↗

Hobby & Makers / Tools

♥ 1.1k⬇ 2.2k🖨 17 prints

License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗toolplanecuttersharpeningworkshopwoodworkingshopsharpenerchiselhoninghoningguidesharpeningjigcutterholdercutterbladehoningjigplaniron

Print profiles

  • Angle Guide.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print