Tips for printing:
- Supports: No
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: No
- Brim: Yes
Colors and filament I used (4 Color Version):
- PLA / White - for the body and eye
- PLA / Black - for the eye
- PLA / Orange - for the beak
- PLA / Red - for the face
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
Chicken
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 670⬇ 3.7k🖨 29 prints
Print profiles
Chicken.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chicken_Multicolor4ColorVersionBambuStudioX1C.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chicken_Multicolor4ColorVersionPrusaSlicerXL.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print