Hueforged T-rex 2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Beige
At layer #15 (1.28mm) swap to Jade White for the rest.

Another T-Rex hueforge

by michele MM3D · original on Printables ↗

Art & Design / 2D Plates & Logos

♥ 403⬇ 1.3k🖨 5 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗3dpicturemulticolordecordesigndecophotodinosaurdinotrexpainted2ddecorationsdrawcanvasjurassichueforgehueforgedmm3d

Print profiles

trex2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
trex2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print