Horizontal stackable egg dispenser
**Added new model Extraramp with more inclination, more ramp, but same height, it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below.
Practical dispenser, model for 12/13 uds. Stackable lower part, infinite floors x 12, model .without supports
Always have fresh eggs, thanks to this dispenser, fill the dispenser with 12 L size eggs,
Bottom model, you can make as many tiers as you need, depending on the height of your fridge drawer.
The inclination of the model, makes that the eggs do not pick up speed, and do not suffer blows, it may be necessary to push them minimally if they cross.
**Add new model with more inclination only 12 mm more height (name with high version.
Add model split for little bed.
Configuration recommended: 3 top layer, 3 bottom layer, 2 perimeter , line width 0,4, infill 10%, ~ 275 grs bottom, ~ 225 grs top.
June2024_ Added anti-fall part preferable tpu or petg.
September 2024 add models XL version
modified models with longer and wider egg passage and improved functionality, without increasing the height.
botton model and top model (also split model for small beds).
other models. Egg
https://www.printables.com/es/model/250788-eggs-rotary-dispenser-slow-down
https://www.printables.com/es/model/250789-helical-and-rotary-eggs-dispenser
New XL_Eggs dispenser stackable (different models)
by Ljhtom (Javier Hernando) · original on Printables ↗
Household / Kitchen
♥ 422⬇ 2.2k🖨 4 prints
Print profiles
4045_Top Dispenser eggs.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Bottom Dispenser eggs.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Top Dispenser eggs_high version.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Bottom Dispenser eggs_high version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Top Dispenser eggs_high version 1 of 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Bottom Dispenser eggs_high version 2 of 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Bottom Dispenser eggs_high version 1 of 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Top Dispenser eggs_high version 2 of 2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1 of 2 4045_Top Dispenser eggs_Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2 of 2_4045_Bottom Dispenser eggs Extramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Top Dispenser eggs_Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2 of 2 4045_Top Dispenser eggs_Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_Bottom Dispenser eggs Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1 of 2_4045_Bottom Dispenser eggs Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tpu_Antifall.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_XL Eggs_Top Dispenser eggs_Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_XL Eggs_1 and 2 part ExtraRamp Top_Dispenser horizontal Eggs.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_XL Eggs_Bottom Dispenser eggs Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4045_XL Eggs_1 and 2 part Bottom Dispenser eggs Extraramp version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print