Dimensions: 

• 20 cm diameter
• 1.6 cm height
• 2 mm per level (8 levels)

Print settings:

• Layer height: 0.2mm
• Infill: 15%
• For non multimaterial printers you'll need to pause the print every 10 layers (1 level if you keep the layer height at 0.2mm) and swap the filament
• For multimaterial printers the 3mf file I uploaded has the color changes already set 

I used 3 colors, starting with a dark wine color, then white, and then a light pink.

To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D