A tall ribbed 200 mm lamp shade model that can use Lamp Base#2.
https://www.printables.com/model/850873-lamp-base-2
Shade - 200 mm height x 135 Width
w/ Base - 250 mm height
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/
3 x M3 by 10 Screws
https://de.aliexpress.com/item/32443118299.html?
3 x M12 Mutter (Nut for weighting)
https://www.amazon.de/dp/B01M30BU88?
3 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the base:
.20 mm Standard
(All standard settings and speeds, Random seam settings)
Filament: Sunlu PLA+ White
The Shade:
Filament: Sunlu PLA+ White
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Aligned
Lamp #8
by Sink · original on Printables ↗
Household / Home Decor
♥ 645⬇ 2.7k🖨 6 prints
Print profiles
OpaqueShim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
RoundCoverBase.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
RoundCover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
72 Base-RibsFlatter-200 E14 v2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print