After printing, you will need to run a razor along the seams where the lid meets the case body and use a thin piece of plastic to pry the lid open to break the the lid from the body of the case.

This model has 0.2 mm gaps between parts by default. If your printer struggles with small tolerances a model with 0.3 mm gaps is also available.

Recommended Print Parameters:

Nozzle Diameter: 0.4 mm
Layer Height: 0.2 mm
Perimeters: 2
Material: PLA, ABS/ASA, PC
Print Orientation: Vertical

Slim Zyn Case

by 0.uincy · original on Printables ↗

Gadgets / Other Gadgets

♥ 143⬇ 2.0k🖨 6 prints

License: Creative Commons — Attribution — Share Alike ↗printinplacethinslimeverydaycarryzynslimcase

Print profiles

Zyn-Case.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zyn-Case_Larger-Tolerances.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Zyn-Case_with_divider.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print