This short explainer video is less than 1 minute long. 

Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. 

One model suits the front right or left, while another model suits the back right or left.

Choose front or rear (side mount on either), and then…

Print as oriented. No supports needed.

Remove the existing M4 screw holding the top of the printed guard. Replace it with a longer M4 screw so you can mount the holder. Suggest M4 x 10mm, but you may be able to use 8mm or 12mm.

Other cool options for the AD5M

You may also like my other AD5M related design work:

• https://www.printables.com/model/785667-flashforge-adventurer-5m-ad5m-simpler-easier-faste
• https://www.printables.com/model/813334-flashforge-adventurer-5m-ad5m-printed-camera-mount 
• https://www.printables.com/model/814546-flashforge-adventurer-5m-ad5m-nozzle-storage-box-t 
• https://www.printables.com/model/827706-flashforge-adventurer-5-ad5m-led-mod-accessory-buc
• https://www.printables.com/model/828632-flashforge-adventurer-5-ad5m-led-light-bars-mod-ac
• https://www.printables.com/model/834011-flashforge-adventurer-5m-ad5m-side-cutter-mount-v1 
• https://www.printables.com/model/834097-flashforge-adventurer-5m-ad5m-improved-spool-holde 
• https://www.printables.com/model/886714-flashforge-adventurer-5m-ad5m-filament-cutter-comp 
• https://www.printables.com/model/1119699-flashforge-ad5m-enclosure-hinge-remixed-to-be-easi 
• https://www.printables.com/model/1119872-flashforge-ad5m-door-handle-remixed-to-print-witho 

Use Klipper stuff on AD5M stock hardware,

• …such as Mainsail, Fluidd, and Klipperscreen, etc, with the stock Klipper install on the AD5M's main board. 
• Get it here: https://github.com/xblax/flashforge_adm5_klipper_mod

Check out other cool AD5M related options here:

• https://github.com/g992/flashforge-ad5m-5mpro-research 

My PayPal tip jar: https://paypal.me/design8studio