english
Joint case with screw lid / Â lid to use as a keychain - Easy to print, no support needed
*added empty ring and simple stand (+ hemp stand https://www.printables.com/model/831439-hemp-stand-for-joint-case )
Recommended print setting: 0.2 layer height, 3 walls, 4 top/bottom, 10% infill, <120mm/s, use brim, support not needed
I have found that the lid is difficult to screw in when using certain brands of filament. I had problems, for example: at eSun. Other brands like Polymaker Polyterra and Eryone work without any problems. - if you also have problems then print the lid with a different material or reduce it in your slicer on the X and Y axis.
Inner diameter: 7 to 12 mm
Inner lenght: 100 / 120 mm
Inner diameter: 12 mm
Inner lenght: 100 / 130 mm
see also my grinder “to go” https://www.printables.com/model/834515-grinder-to-go-with-storage-compartment
-----------------------------------------
deutsch
Joint Hülle mit Schraubdeckel/Deckel zur Verwendung als Schlüsselanhänger – Einfach zu drucken, keine Supports nötig
*"ich bin leer" Ring und simple Ständer (+ Hanf Ständer https://www.printables.com/model/831439-hemp-stand-for-joint-case ) hinzugefĂĽgtÂ
Empfohlene Druckeinstellung: 0,2 Schichthöhe, 3 Wände, 4 oben/unten, 10 % Füllung, <120 mm/s, Brim verwenden, Supports nicht nötig
Ich habe festgestellt, dass sich der Deckel bei Verwendung von bestimmten Filament Marken nur schwer reindrehen lässt. Probleme hatte ich zb. bei eSun. Andere Marken wie Polymaker Polyterra und Eryone funktionieren ohne Probleme. - wenn du auch Probleme hast dann drucke den Deckel mit einem anderen Material oder verkleinere ihn in deinem slicer auf der X und Y Achse.
Innendurchmesser: 7 bis 12 mm
Innenlänge: 100 / 120 mm
Innendurchmesser: 12 mm
Innenlänge: 100 / 130 mm
Viel Spaß beim paffen und gerne auch meinen “habs eilig” grinder anschauen  ;-)
https://www.printables.com/model/834515-grinder-to-go-with-storage-compartment
Joint case with screw lid / with keychain lid
by fonzy · original on Printables ↗
Healthcare / Medical Tools
♥ 89⬇ 738🖨 1 prints
Print profiles
smoke_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
smoke_2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
smoke_4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
smoke_3_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
smoke_4_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
smoke_3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
empty ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
simple stand.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print