This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums (I am unsure about home vacuums). Can drill holes up to 25mm.

It is designed so that you can attach foam tape to the rim. This will protect your walls from scratching and provide a better seal. This is the foam tape that I used.

If you are looking for a good Shop Vac that won't break the bank, then this is the one I use Fein Shop Vacuum.

Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. The product links below may be affiliate links.

• Nozzle: 0.4mm

• Layer Height: 0.20mm

• Infill: 15% with Rectilinear Pattern

• Orientation: Orientation is important, see image

• Supports: None Required

• Brim: A large brim is recommended

I would recommend printing this print PETG rather than PLA for increased durability.