I originally made this as a gift, and it came out great!
You can use this as a toilet brush cup or as a flower pot.
I made this for 85 mm diameter brush, so if your brush has a different size, scale both models like this before printing:
Scale% = YourBrushDiameter/85*100
I attached .3mf files for OrcaSlicer (maybe also works with Bambu Studio).
To add some extra weight and a premium feel, pause the print at layer 90 and add something heavy. I used some scrap metal parts and fixed them in place with tape.
To save material and get a good print, use the following settings:
Putin-ToiletBrush-Head.stl:
Wall loops: 2-3
Bottom shell layers: 2
Infill: Lightning 25% (this setting saves a LOT of material)
Supports: Tree
Putin-ToiletBrush-Cup.stl:
Vase Mode: enabled
Bottom shell layers: 2
Brim: 10 mm
I used a 0.6mm nozzle and 0.3mm layer height with PLA-CF, which took 300 g of material.
Putin Toilet Brush Holder
by Peepee poopoo · original on Printables ↗
Art & Design / Sculptures
♥ 318⬇ 1.3k🖨 4 prints
Print profiles
Putin-ToiletBrush-Cup-settings.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Putin-ToiletBrush-Cup.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Putin-ToiletBrush-Head-settings.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Putin-ToiletBrush-Head.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print