I needed a round container to hold a stack of 2032 batteries and separators. I looked at a few existing designs but nothing quite matched what I was doing, so I made my own. These can be used for much more than batteries, of course.
Included sizes:
The dimensions of the included STL files are:
Container-31mm-short.stl - 31mm outside diameter x 20mm outside height, 22mm inside diameter, 17mm inside height
Container-31mm.stl - 31mm outside diameter x 36mm outside height, 22mm inside diameter, 33mm inside height
Container-45mm.stl - 45mm outside diameter x 30mm outside height, 36mm inside diameter, 27mm inside height
Customization:Â
I have included parameterized Fusion360 files so you can create any size you need. The following parameters can be altered:
Outside diameter (d)
thread diameter (thread_d)
thread clearance (clearance)
bottom thickness (bottom_thickness)
lid thickness (lid_h)
inner height (inner_h).
Thread Clearance:
If the threads are too tight, you may need to adjust the clearance parameter in the Fusion360 file to allow for a better fit. I have found different requirements for different filaments. If you make an adjustment, you only need to reprint the lid. The clearance parameter has no effect on the base container!
Choose the lid that matches the outside diameter of the container (31mm or 45mm).
I printed this with a 0.6mm nozzle and 0.32mm layer height.
If you like these, you may also like my second batch of round container designs!
---
4/2/2024 Update: I added an inlay to the lid so you can print color-coded lids. Simply use the z-hop method to print the lids. Â I also fixed an issue that caused the grips on the lid to disappear if resized too large (the number of grips should scale with the lid size now). Â Use Container with color Inlay.f3d for new changes.
Round Containers with screw-on lid
by Timinator · original on Printables ↗
Hobby & Makers / Organizers
♥ 101⬇ 1.2k🖨 6 prints
Print profiles
Lid-31mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid-45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Container-31mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Container-45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Color_Lid_Inlay_31mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Color_Lid_31mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Container-31mm-short.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Color_Lid_Inlay_45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Color_Lid_45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print