This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism.
Assembly Instructions
Hardware
- 4x M2 Heat-Set Threaded Inserts
- 2x M3 Heat-Set Threaded Inserts
- 4x M2x8 Screws
- 2x M3x8 Screws
Printed Parts
Print one of each of the printed parts. Support material should not be required for any of them, but good part cooling will help. ABS is recommended if it will me used in a hot place, like on a car's dashboard. If printing with ABS, some parts may need a brim to prevent warping.
This is the pictured color scheme
Primary Color (Black)
- Body
- Back Cover Insert
- Front Panel Insert
Secondary Color (White)
- Antenna Cover
- Back Cover
- Front Panel
Accent Color (Blue)
- Buttons
Translucent
- GPS LED
- Status LED
Steps
- Insert heated inserts.
- Glue LED pipes into Front Panel Insert.
- Slide Buttons into slot in Body.
- Put Front Panel Insert over top of T-Beam.
- Put T-Beam and Front Panel Insert on front of Body. Screw down with M2 screws.
- Put on Front Panel and screw to Body with M3 screws.
- Press Antenna Cover onto antenna connector on T-Beam.
- Snap Back Cover Insert into Back Panel.
- Snap Back Panel onto the back of Body.
Meshtastic TTGO T-Beam Case - SciFi
by unlimitedbacon · original on Printables ↗
Gadgets / Portable Devices
♥ 447⬇ 1.9k🖨 21 prints
Print profiles
T-Beam Case - GPS LED.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Back Cover Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Antenna Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Status LED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Buttons.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Front Panel Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Back Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Front Panel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
T-Beam Case - Body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print