NEW 3.0 version now available on MakerWorld!

https://makerworld.com/en/models/426056

This is the 2.0 version:

Now with more bounce, stronger, thicker, more fun!

Prints without supports for easier post processing. Print with a 5mm brim, 10mm if you have adhesion issues.

For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily, try a FPLA instead if you have access.

Brim IS necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.