This is a model created based on a scan of a figurine of a small angel, which is featured as the main photo. The other photos show the printed figurine. I'm attaching the print file with the figurine, which is of the original size. Of course, you can scale the .stl file to any size. Remember to print the model with supports, preferably organic ones.

Recommended printing settings:

Filament: PLA

Brim: Not recommended

Supports: Organic

Infill: 15%

Nozzle: 0.4 mm

Prusa Slicer: Basic settings 0.20 mm Structural

Printing time: 1h 45 min

Baby Angel

by Filip · original on Printables ↗

Art & Design / Sculptures

♥ 141⬇ 1.5k🖨 5 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗scanchristmasangelsculpturebabythingiversechristmasornamentchristmasdecoration

Print profiles

Angel.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print