Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping.

For the HueForge prints:

I printed with a .4mm nozzle. If you're new to hueforge prints: The transmission distance listed by the filament names has to do with color bleed throughs and opacity. If you don't have the exact filaments I used, you can substitute for one of a similar transmission distance and color. Even if you don't know the Transmission distance, they should still print OK in general. You do not need an AMS or MMU system, but be sure your printer will listen to pause or park commands to allow filament swaps at layer heights. Program the pauses or filament switches in your preferred slicer. Need more hueforge instructions? I'd suggest watching TeachingTech's basic walkthrough on youtube: https://youtu.be/ua3DoRlmN-c?si=GrfsyxpX3xTmaIv2

Pokemon Blue (Big and Small):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Creality Black Transmission Distance: 0.1
PLA Overture Blue Transmission Distance: 1.5
PLA+ Creality Light Blue Transmission Distance: 2.2
PLA Creality White Transmission Distance: 5.2

Swap Instructions:

Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #17 (1.44mm) swap to Light Blue
At layer #21 (1.76mm) swap to White for the rest.

Pokemon Red (Big and small):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Creality Black Transmission Distance: 0.1
PLA D03D Red Transmission Distance: 4.1
PLA BambuLab Basic Orange Transmission Distance: 5.7
PLA Creality White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.04mm) swap to Orange
At layer #19 (1.52mm) swap to White for the rest.

Pokemon Yellow (Big and small):

Filaments Used:
PLA Creality Black Transmission Distance: 0.1
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Sunlu HS Yellow Transmission Distance: 6.6
PLA Creality White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #25 (2.08mm) swap to White for the rest.


 

Happy printing!

(printed on Bambu P1S with AMS)

UPDATE June 2024: Small / original sized cartridges

I've now begun to add a more 1:1 scale version of the cartridges. Please note that these will not work in any gameboy system, the cartridges aren't true 1:1 and the hueforge labels will be protruding slightly from the surface. I don't think a hueforge label will be able to be used on a cartridge with a game inside. For quick reference, the small hueforge labels are 39x42mm.

Check the remix tab, @etmidust_277223 took the time to make a better small cartridge

The files are sorted into folders Large and Small.

I do plan on adding other Pokemon games here once I grow my filament library a bit more. If you have interest in any particular game, leave a comment and let me know!