Tips for printing:
Supports: Yes (see pictures below)
Layer height: 0.16mm (optimal)
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: No
Colors and filament I used (4 Color Version):
PLA / Red - for the body
PLA / Black - for the eye, wings and feathers
PLA / White - for the eye
PLA / Orange - for the beak and feet
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
You need supports for the beak! (See picture below!)
If you paint (Multicolor) my model, make sure that everything is painted correctly.
See pictures below.
Cute Bird
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 105⬇ 915🖨 9 prints
Print profiles
Cute_Bird.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cute_Bird_Multicolor4ColorVersionBambuStudioX1C.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cute_Bird_Multicolor4ColorVersionPrusaSlicerXL.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print