Updated model
Edit 4.2.2025
Added PETG model That can use also camera cover thath can be seen in gallery.
I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very lightweight.
Edit 30.1.2025
Updated model. Because camera modules are so thick, I decided to create separe camera covers. Case can be thinner and therefore phone wont feel so bulky.
Camera covers has a tiny pocket or sleeve witch held them in tpu case, They seem to held pretty good no glue needed. Can be printed with PLA or PETG
There is two different kind of models to choose for cameramodule.
.3mf file also included, where I set without top and bottom layer, but top most layer is closed.
I find that cases are much faster to print this 3d honeycomb which you can see through, but it still covers phone nicely.
Edit 20.4.2024
I wanted to print cover with two materials so. First part is TPU and then I made color change and put PETG with carbonfiber in middle. I tuned temperature after change to PETG to 245 Celsius and speed to 80%. Then last part is again TPU with original temperature 230 Celsius.
Bottom layer set to zero and infil is 3D honeycomb with 25% infill.
Buttons can be printed with pla or petg and slide in place.
Edit:5.3.2024
Updated model. Rounded outer edges a little (feeled too sharp), also aligned camera holes to sit better.
Added also model with buttons in place can be also printed like that.
Samsung Galaxy S23 Ultra cover PETG and TPU models
by JsR · original on Printables ↗
Gadgets / Portable Devices
♥ 110⬇ 1.4k🖨 6 prints
Print profiles
buttons.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Samsung_galaxy_s24_ultra_with_buttons.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Samsung_S23_Ultra_case_flex.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
S23 ultra cover with buttons updated.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GalaxyS23Ultra_TPU.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cameramodul1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cameraring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cameramodul2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GalaxyS23Ultra_TPU.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GalaxyS23UltraPETGcover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print