Slicer settings and other info:

0.4mm nozzle
0.2 layer height
PLA
Supports enabled (tree supports)
15% gyroid infill

Holes centers are placed 30mm apart for the big mount, and 25mm apart for the medium sized one.

All files are available in both .stl and .step formats.

Multiboard screwdriver mount

by Warlock Til · original on Printables ↗

Hobby & Makers / Organizers

♥ 145⬇ 1.2k🖨 9 prints

License: Creative Commons — Attribution — Noncommercial ↗organizersupportmountscrewdrivermultiboard

Print profiles

single_screwdriver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3_screwdrivers.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
5_screwdrivers.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print