Blade Scraper
Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility blade, two M3 nuts, and two M3 screws.
Saw Handle
Print without bottom infill to preserve the beautiful design. Connect both parts using the connecting block and glue them together. Insert the white ring. Remove the supports under the screw. Now, all you need is an M3 screw and nut. Handsaw 222950.
Wire Stripper
You will need M3 nut, screw, washer, and utility blade. Attach the white ring with glue.
See also:
18mm Utility Knife
https://www.printables.com/cs/model/788840-18mm-utility-knife
Blade Scraper, Saw Handle, Wire Stripper
by Jan Štech · original on Printables ↗
Hobby & Makers / Tools
♥ 1.4k⬇ 3.9k🖨 67 prints
Print profiles
Blade Scraper_Ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wire Stripper.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Saw Handle_Connecting Block.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Blade Scraper.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Saw Handle_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Saw Handle_Ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Saw Handle_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wire Stripper_Ring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print