Print with supports on, since quite a bit will be floating 20 mm off your plate. Or flip the shamrock to be on the plate and most printers can probably handle it without supports.

I printed with 10% infill… pretty much anything should work for this decorative piece.

The cover photo is the larger version. It would probably pop a bit more if my wreath color was a different green. I also chose to change the stud base to a different color to provide some contrast. Using .2 mm layers, you will need to change at 20.20 mm.

Shamrock for the Giant LEGO Wreath

by Paul Shackelford · original on Printables ↗

Seasonal designs / Spring & Easter

♥ 270⬇ 971🖨 11 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗legocloverstpatricksdayshamrocklegowreath

Print profiles

LittleShamrock.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
BigShamrock.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print