I really need this because I carry my skis 2 km to get to where I can put them on to ski. The clips hold the skis and poles together so I am just carrying one awkward thing instead of four awkward things. Its a little fidgety to put together, but works nicely.

I used 4 perimeters, and top and bottom layers, 15% gyroid infill, PETG.

From auban's original post (mostly):

The Fusion model has parameters so that you can easily change it to fit your poles and skies. Just take the measurements for width of the skies, the thickness when two skies are held together and the diameter of the poles. Also change the text so that the clips can be put on the correct skis. Other measurements can of course also be changed, like the distance between the skies and the poles and everything else.

The model is remixed from this: https://www.thingiverse.com/thing:3326869
Which in turn is based on this: https://www.thingiverse.com/thing:2729641
Which is based on this: https://www.thingiverse.com/thing:233003

And the original inspiration is from: http://www.klipski.fr/?page=&id=&lang=GB