To support me the most, please download from MakerWorld
Link: https://makerworld.com/en/models/170277#profileId-186972
Hate having to use a plyers to remove the bit? Well no longer.
This remix has relief cuts on all the corners meaning the walls are what is holding the bit and not rounded 3D printed corners.
There are 2 versions -
- Just with Relief Cuts
- With Relief Cuts plus cutout to insert a 6mm x 1.5mm magnet in the bottom
Snug Fit = 6.45mm width of Hex for the Bit
Normal Fit = 6.50mm width of the Hex for the Bit.
The Snug (6.45mm) will fit the best if your pressure advance and flow is properly calibrated.
Print this version and the original and i guarantee (or your money back) that this version if far superior.
Bit Holder Remix with Relief Cut Corners - Improved Bit Holding
by Ryan Bailey · original on Printables ↗
Hobby & Makers / Tools
♥ 1.8k⬇ 6.5k🖨 121 prints
Print profiles
CC Bit Holder_Knurled_Remix_Snug.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CC Bit Holder_Knurled_Remix_Normal.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CC Bit Holder_Knurled_Remix with Magnet_Snug.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CC Bit Holder_Knurled_Remix with Magnet_Normal.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print