June 18, 2024
Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be attached to the front with 4 M3 screws. When using my chassis you need to take care of the clearance below the rear seats.
----------------------------------------
This is a cabin for my UNIMOG RC project. It goes with the corresponding chassis you can find here.
To mount it on the chassis you will need 4 brackets I'm providing here (you won't find them in the chassis files).
The files are divided in 3 colors (Red = the body color , Grey = the logos + brackets, Black = Seats, mirrors ,fenders etc.) The U5023 signs are printed in 2 colors; the bottom is Red and the letter /numbers are Grey.
Obviously you can chose other colors but this allows to organize the print files.
The cabin comes in 3 parts because it was too big to print in one go. The 2 front parts are mounted with 2 M3 screws each on the main part. The hatch is attached to its swivel by a M3 screw and the swivel is secured to the cabin roof with another screw. You should be able to “open” the hatch and put it on the left side of the cabin.
The hood has 2 pins that work like hinges so that the hood can also be opened. You need to slide the pins starting from the hood until they reach the corresponding hole in the cabin.
Mounting the front grill: For the Mercedes sign glue the circular black background to the middle round part then glue the logo on top. Also at the back of the grill you need to glue the grill background. Then mount the grill to the cabin with at least 2 short M3 screws (4 if you have plenty).
You can then add the Unimog logo by gluing it to the grill.
The dashboard is mounted on the “floor” part (this includes the seats) with 2 M3 screws.
You can then glue the steering wheel and the little Mercedes logo (it is quite fragile so you might need to position / glue separately the star and the circle if they detach.
You can now mount this assembly on to the cabin with 4 M3 screws. (To ease the process and as the fit is tight, you should use a nail to ensure the screw holes are aligned). You can now add (glue) the hood handles and the little grill that goes on the left side of the cabin.
Fenders: Position the fenders and attach them to the cabin with 2 M3 screws each (one screw will go into the “floor” part).
Doors: Glue the corresponding door interiors to their respective door (guides provided). Glue the handles and the U5023 sign.
Put the 4 pins inside the hinges on the cabin (you might want to glue them so that they don't fall off); then mount the doors (sliding them onto the pins). You should be able to open the doors.
Mirrors: Glue the grey ”glass" parts on their respective mirrors. Assemble the mirrors on the supports (guides) it should be a snap fit so that you can change the angle of the mirrors. Then glue the mirrors supports to the doors (guides).
You can now glue the snorkel on the right side of the cabin.
Position the brackets on the chassis (2 M3 screws each). There are not so many available screw holes left on the chassis so you should be able to find them ! The front brackets are to be assembled just behind the bumper and the rear brackets go just before the steering rods (coming from the front). If you're still looking for the right screw holes, the last picture might help !
Now mount the cabin on the chassis with 2 M3 screws in the front. Gravity will keep the rear part in place.
Enjoy !
(printing is quite long but at 1/10 scale it is to be expected)
Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale
by Prism08 · original on Printables ↗
Toys & Games / Vehicles
♥ 404⬇ 2.6k🖨 4 prints
Print profiles
CAB14-01-Cabin right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB13-01-Cabin left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB03-01-Grill 5023.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB30-01-Right door.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB12-01-Cabin main.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB18-01-Hood.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB19-01-Left door.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB51-04-Door pin.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB05-01-BL background.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB06-01-Grill background.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB01-01-Door inside R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB21-01-Snorkel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB52-01-Hood Handle M.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB53-01-Hood Handle L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB55-01-Little side grill.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB54-02-Door handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB50-02-Hood pin.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB02-01-Door inside L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB20-01-Floor.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB09-01-FENDER L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB10-01-FENDER R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB56-01- Steering wheel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB22-02-Mirrors support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB17-01-Dashboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB57-01-STW Logo.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB71-02-SM glass.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB04-01-Big logo.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB70-02-BM glass.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CHE92-01-RR Cabin support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CHE91-01-RL Cabin support.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CHE90-01-Front Cabin support R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CHE93-01-Front Cabin support L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB07-01-Unimog logo.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB08-02-U5023.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB16-01-Hatch swivel.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB15-01-Hatch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB24-01-Small mirror L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB26-01-Small mirror R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB23-01-Big mirror L.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB25-01-Big mirror R.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CAB12-01-Double cabin1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print