Dual-Filter Solder Fume Extractor: H12 HEPA & Carbon Filter | AC/DC/PD | No Supports

Featured in 3Printr.com!
When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for you and everyone around.

What Makes This Fume Extractor Different?

This fume extractor is more than just effective—it’s the result of thorough research, testing, and valuable feedback. Unlike a simple fan, it uses a two-stage filtration system for comprehensive air purification:

HEPA Filter: Captures tiny particles and dust for a clean environment. (Why HEPA?)
Carbon Filter: Absorbs harmful gases, fumes, and odors for full purification.

For even more effective fume removal, you can attach a 125mm hose to the back of the extractor to vent fumes outside.

Easy and Versatile Design for Everyone

This fume extractor is designed to be simple and adaptable. It’s fully support-free for easy 3D printing, uses readily available hardware, and offers three power options. Also no need to cut the fan cable, so you won’t void any warranties. Additionally, a handle can be added for easy portability.

To make the setup process as easy as possible, I’ve included clear wiring diagrams, a detailed assembly video, and step-by-step instructions.

----------------------------------------------------------------------------------------------------------------

Assembly Guide

Select Your Power Version: Decide whether you want to use AC, DC, or PD power.
Choose Your Additional Parts: Determine if you need any optional components, such as a handle.
Gather Hardware and 3D Parts: With your power version and additional parts chosen, you’ll know exactly what hardware to buy and which 3D parts to print.
Follow the Wiring Diagram: Once you have all your components, refer to the electrical wiring diagram for proper connections.
Watch the Assembly Video: Finally, follow the assembly video for step-by-step guidance on putting everything together.

----------------------------------------------------------------------------------------------------------------

Power Options - Choose What Works Best for You

Select your preferred power source for the fume extractor:

AC Power: Plug it into a traditional wall outlet (some electrical knowledge required).
DC Power: Uses a 12V DC jack, like common adapters for electronics.
PD Power (USB-C): Modern and convenient with USB-C PD adapters supporting 12V.

Important Note: For the AC version, please ensure that all AC wires are properly soldered and

----------------------------------------------------------------------------------------------------------------

Parts List (Approximate Cost: €50)

Essential parts (all versions require these):

3D Printed Parts (available for download on Printables)
Noctua NF-F12 iPPC-3000 PWM Fan (120mm) - Amazon NL, Amazon US
12V PWM Controller - AliExpress
Rocker Switch (21x15mm) - AliExpress
M3 Socket Screws (19x, 6mm) - AliExpress
M3 Heat Inserts (17x, 4.2mm OD, 3mm L) - AliExpress
H12 HEPA Filter (120x120mm) - AliExpress

Note: The included active carbon filter restricted airflow, so I only used the HEPA filter. Alternatively, you can use a 16mm EPA sheet cut to size (120x120mm): AliExpress

Active Carbon filter (Cut to size 120x120mm) - AliExpress
Wire (22-20 AWG recommended, thicker may be stiff) - AliExpress

Additional Parts (depending on chosen power source):

AC Power (Requires soldering skills):
- 12V switching power supply 1A version - AliExpress
- male inlet socket - AliExpress
- 2x M3 nuts - AliExpress
- power cable - Amazon
DC Power:
- 12V 1A DC adapter - AliExpress
- Jack Socket Female - AliExpress
PD Power:
- PD adapter supporting 12V - AliExpress
- 12V PD Power trigger Module - AliExpress

Please dont cheap out on power supplies. Use a well known brand.

Optional Extras:

Indicator LED light - AliExpress
3D printed or store-bought handle - hardware store NL, Amazon US
Ø 125mm Hose for fume redirection - Amazon NL
Rubber bumper - AliExpress

----------------------------------------------------------------------------------------------------------------

Wiring Diagrams:

AC wiring diagram

DC wiring diagram

PD wiring diagram

----------------------------------------------------------------------------------------------------------------

Additional:

HEPA vs. HEPA+Carbon Filter Comparison

PD Version Assembly

This extractor uses a E12 filter to balance airflow while still capturing the harmfull particles.

"Get the Files & save your lungs"

Updatelog: (day/month/year)

16/12/2024: Added extra spacers and a custom file
07/11/2024: Updated URLs
11/10/2024: Remixes (share alike) allowed, mirrored version available.

Dual-Filter Solder Fume Extractor: H12 HEPA & Carbon Filter | AC/DC/PD | No Supports

by HugoWhite · original on Printables ↗

Hobby & Makers / Tools

♥ 1.3k⬇ 1.9k🖨 34 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗upgradedisplaydecorationboxorganizertoolframeholderminiorganiserdeskcasehandlelowpolyfilamenttestfumesmokedesignmountdiymodulardctabletopgearenclosureairmodelfunfusion360storageflexiblejointaccessorycoversolderingelectricfanminimalistadapterworkshophobbyguidemodernrepairusborganizationtoolscarbonaccessoriesfanductuniversalindoorhepaextractorhealthusefulusbcender3airflowwireorganizethingiversefumeextractoreasyprintsimpleelectricalminimalisticexhaustfanorganizerspurifieruniquesolderingtoolfumefiltersolderfumeextractorcarbonfilterhepafiltersolderingequipmentacpdfumeextractiondualfilter

Print profiles

Feet plate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@FlorianS_538770 Fan cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@DrZippit_1614204 Feet - PD version USB-C.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
STL Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filter mount - Handle-cutout STL Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fan cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filter mount - Handle-cutout 96mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filter mount - Without handle-cutout.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cap.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet - AC version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet - DC version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@navard_305670 Feet - DC version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@FlorianS_538770 Filter mount.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet+Bracket - PD version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@hongkongkiwi_1701206 Filter mount enlarged.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet - AC version MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet - DC version MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Feet - PD version MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fan cover MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cap oriented inward.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filter mount MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@3dprintuser_2137462 Extended fan cover .stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4.5mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
@yodakubota_513726 Filter mount enlarged MIRRORED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print