🖨️ Print Shop
Shelf Brackets for Multiboard Storage System

At the time I am posting these, Multiboard only has brackets up to 2x2. I wanted something larger so I came up with these.

They attach using the large Multiboard bolts.  Use the 9mm Flat Head if you are putting the Multigrid Base Plate on the shelf.  You want to have the base plate straddle where the tiles join.  In the picture, I used 4 8x8 tiles. So I used 3 4x4 base plates and 2 4x2 base plates.

I attach the base plates to the tiles with the Thin Head Multigrid T-Bolt.  They take very little filament so I attached at all points.  16 per 4x4 plate.

https://www.multiboard.io/parts-library

Not intended for heavy loads.  I didn't test, though I noticed the Tiles on the wall flexed before the brackets did. You can use as many brackets as needed.

March 03, 2024: Added .step files for all the brackets.

Shelf Brackets for Multiboard Storage System

by Nerlin · original on Printables ↗

Hobby & Makers / Organizers

♥ 203⬇ 917🖨 3 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗multiboard

Print profiles

  • MSW Bracket 4X4 Inside.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • MSW Bracket 5X5 Inside.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • MSW Bracket 6x6 Inside.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • MSW Bracket 7x7 Inside.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • MSW Bracket 8X8 Inside.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print