Signal Launcher Leaf Sight V2 by Qwerm

A leaf sight designed for use with 37mm signal launchers. The sight can be either mounted on side or top picatinny rails. Due to various signaling rounds having different ranges, the sight is marked out to various angles. The sight features an adjustable front sight and a flip up leaf sight set to 5, 10, 15, 20, 25, 30, 35, and 40 degrees. I designed this sight for use with a 37mm launcher I am in the process of building. I have put that project on hold for the time being so this sight is untested.

Changelog:
V2 - Replaced a printed spring mechanism with a metal ball plunger since the printed spring would weaken over time. Only the Rear Sight and Main Body files are changed.

Print Orientation: See images included in the release.

Recommended Print Settings:

Layer Height: 0.2mm

Wall Lines: 4

Infill Density: 30%+

Support: No

Fuzzy Skin: No

Materials Needed:

1x - 1/8" Dia, 1" Length Metal Rod

1x - Compression Spring (1/4"-3/8" OD, roughly 5/8" in length)

1x - VCN410-SR-6 Ball Plunger

1x - M5 20mm Socket Head Screw

1x - M5 Nut

2x - M4 Nut

Side Mount:

1x - M5 35mm Socket Head Screw

2x - M4 15mm Socket Head Screw

Top Mount:

1x - M5 30mm Socket Head Screw

2x - M4 10mm Socket Head Screw

linktr.ee/qwermmakes

Signal Launcher Leaf Sight V2

by QwermMakes · original on Printables ↗

Sports & Outdoor / Outdoor Sports

♥ 58⬇ 679🖨 2 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗40mmsightairsoftlauncherfirearm37mm

Print profiles

SignalLauncherLeafSight-SideMount-A.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-FL.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-FLR.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-L.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-TopMount-A.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-FrontSight.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-TopMount-B.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSightSpring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-R.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-F.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-MainBody.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-Blank.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-LR.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-SideMount-B.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-RearSight-FR.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-FrontSight.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-SideMount-B.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-TopMount-A.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-TopMount-B.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSight-SideMount-A.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSightV2-MainBody.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SignalLauncherLeafSightV2-RearSight.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print