Print Settings:

0.4 Nozzle
0.2mm Layer Height
40% -60% Infill of choice
5 Perimeters
Printed fine without any supports on MK4. I used Prusament filaments.

Materials and Tolerances:

PLA with T-0.1mm pretty much screwed in without any post processing while
PETG-CF needed light sanding. That's why I'm attaching 2 options for download with 0.1mm and 0.2mm tolerance between clamp and the pin thread. I would say - if you have some sanding paper and small round file (2mm) to clean between threads go for 0.1mm model and make it as tight as you want. Otherwise 0.2mm option might be easier and require no post processing (Tested).
PC I test printed one Clamp Frame sideways, - it works as in the photo of description.

Tips:

To Mount Bottom-Ends I suggest rotating handle clockwise all the way till Pin pushes itself in.
To Dismount I suggest to rotating handle counter clockwise all the way till Pin unclips itself.

C-Clamp with Swappable Clamp-Ends

by Studio Space Dust · original on Printables ↗

Hobby & Makers / Tools

♥ 2.8k⬇ 8.7k🖨 89 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗adjustableclampclampsclampsetcustomisable

Print profiles

Clamp T-0_1mm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Clamp T-0_2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01_Clamp Pin (Non Clip).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Top End V1 T-0_1m.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Bottom End V1 T-0_1m (Non Clip).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top End V3 T-0_1m.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top End V4 T-0_1m.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Bottom End V3 T-0_1m (Non Clip).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Bottom End V4 T-0_1m (Non Clip).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Top V1 and Bottom V1 T- 0_1 (For your own designs) (Non Clip).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02_Clamp Pin (Clip-On) + Bigger Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Top End V1 T-0_1m.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top End V2 T-0_1m.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 01 Bottom End V2 T-0_1m (Non Clip).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Bottom End V3 T-0_1m (Clip-On).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Bottom End V2 T-0_1m (Clip-On).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Bottom End V1 T-0_1m (Clip-On).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Bottom End V4 T-0_1m (Clip-On).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gen. 02 Top V1 and Bottom V1 T- 0_1 (For your own designs) (Clip-On).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tightening Tool for Gen. 02_Clamp Pin T-0_1mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tightening Tool for Gen. 02_Clamp Pin T-0_2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tightening Tool for Gen. 01_Clamp Pin T-0_2mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tightening Tool for Gen. 01_Clamp Pin T-0_1mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top End V5 T-0_1m (Clip-On) 65mm wide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bottom End V5 T-0_1m (Clip-On) 65mm wide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top End V6 T-0_1m (Clip-On) 65mm wide corner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Bottom End V6 T-0_1m (Clip-On) 65mm wide corner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Tripple Pin.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print