2U shelf to mount a mini-itx motherboard in a 10 inch rack cabinet.
Do not print in PLA. The heat and the weight WILL eventually deform it.
Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.
I printed it in PETG with the front plate laying on the bed and no supports. The extra piece is a bracket for mounting low profile PCIE cards. It has to be screwed on the front plate with two M3x12 mm (or longer) screws.
It supports a 12mm momentary switch, and a 2x USB3.0 ports connector.
UPDATED:
This is the second version of this model. It now supports 2 slots pcie cards and an additional single slot pcie card on the top.
Mini ITX case for 10 inch rack V2
by heron · original on Printables ↗
Gadgets / Computers
♥ 227⬇ 1.4k🖨 2 prints
Print profiles
rack itx - big bracket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rack itx -small bracket.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rack itx.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print