Model size: 180x400 mm

Wood used: White Pine, White Maple

Stain used: Golden Pecan

CNC Process:

For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link). At 500-1500mm/min cutting speed with 1.5mm stepdown.

For the Parallel-Pass Job, I used a (Genmitsu R0.5 ball nose bit: Amazon link). At 500- 1000mm/min cutting speed with 0.2mm Stepover.

You can also use this open source Mesh Simplification website to reduce model to your liking: Fast Quadric Mesh Simplification

Remix Changes:

I simplified the model for easier and quicker tool path generation in Fusion360 and increased the (top, left and right) outer walls by 3mm because they were too weak and would break easy.

Update 2 : Fixed the two windows left and right of Jesus, because they were too small and the tool would chip and break them when passing.

Enjoy! And post makes.

The Last Supper cnc router relief

by 𝘾𝙖𝙙𝙑𝙞𝙥𝙚𝙧 · original on Printables ↗

Art & Design / Wall-mounted

♥ 234⬇ 3.0k🖨 3 prints

License: Creative Commons — Attribution ↗artrouterwoodworkingcncreliefcncmachinecncrouterjesusreligiouscarvingleonardodavinciapostleslastsupper

Print profiles

last_supper_remix.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
last_supper_original_model.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
last_supper_remix 2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print