Update ****** Additional Version to add Multiconnect version from @DavidD
V2 - Multiboard Multiconnect Caliper Holder
- Layer: 0.20mm
- Infill: 15%
- Support: Yes (Lines)
- Bed Adhesion: None or Skirt
- Speed: 180mm/s
- Wall Line Count:
V1 - Multiboard Push-Fit Caliper Holder
I printed with Push-Fit Connector down to add supports on back side
- Layer: 0.20mm
- Infill: 15%
- Support: Yes (Lines)
- Bed Adhesion: None or Skirt
- Speed: 180mm/s
- Wall Line Count: 3
- Material: Voxlab PLA Pro
Multiboard Caliper Holder
by J3D_Designs · original on Printables ↗
Hobby & Makers / Organizers
♥ 479⬇ 4.9k🖨 43 prints
Print profiles
Multiboard Caliper Holder.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Multiboard Caliper Holder V2 Multiconnect.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print