WARNING:
This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it near other people or animals!

Description:

This dog whistle produces a very loud tone of about 19 kHz. You'll probably think that the whistle isn't working - but that's because humans (especially as they get older) hear higher tones less loudly or not at all - unlike many animals! I therefore recommend a frequency measurement app for testing. I use this android app.

How to print:

Use a line width of 0.4 mm and a layer height of 0.2 mm, 6 top layers and 6 bottom layers.

The whistle requires correct positioning of the Z-seam - it shouldn't be placed in the narrow air passages inside the whistle. The Z-seam should be positioned as shown in the last 2 images above. Use the “Z Seam Alignment: User specified” option in Cura or the "Seam Painting" option in PrusaSlicer and Bambu Studio to achieve this.

Print slowly to achieve sharp edges.